Home with a black standing seam metal roof in Bristol, TN

Steep and custom metal work

Metal Roofing Services in Bristol, TN

Standing seam and ribbed metal roofs, cut and flashed to fit, from a Bristol family that has been roofing since 1973.

Metal roofing in Bristol is a big share of what we do, and it's the work we like best when a roof gets steep and complicated. White's Roofing Co has been one family's business since 1973. Bobby White's father started it, Bobby has been on roofs since 1991, and his son runs jobs with him now.

Drive any back road in Sullivan County and you'll pass old tobacco barns still wearing the tin that went on before most of us were born. Metal lasts here. A standing seam metal roof on a house does the same job with tighter seams, real underlayment and a much better look, and ribbed panels are there when the budget or the building calls for them. We're licensed and insured in Tennessee and Virginia, so the state line never decides whether we can take your job.

If your house is better suited to shingles, our residential roofing work covers that side, and the full rundown of what we do is one click away.

How we put metal on a house

How a Metal Roof Installation Comes Together on a Bristol House

Every metal roof we put on follows the same order, whether it's a plain gable ranch or a two-story with dormers on three sides.

  1. Tear-off and decking check

    The old roof comes off down to bare decking, and any soft or rotted boards get replaced before metal goes near it.

  2. Underlayment across the deck

    Underlayment covers the whole roof, with extra care at the eaves and valleys where water gathers.

  3. Trim and flashing bent on site

    Drip edge, valley metal and flashing at walls and chimneys, bent to fit the house in front of us instead of pulled off a shelf.

  4. Panels cut and set

    Each panel is measured and cut to meet every hip, valley and dormer, then fastened down in line.

  5. Ridge cap and cleanup

    The ridge gets closed up, trim and fasteners get checked, and the metal scraps and shavings leave with us.

Metal roof installation on a cut-up roof is slow, careful work. On one recent steep custom job with dormers, the crew spent four days cutting pieces and bending flashing to fit. That's normal for us. If you're pricing a full roof replacement, metal is worth a look next to shingles.

Roofer installing green metal roofing panels on a house in Bristol, TN

Common jobs

When Bristol Homeowners Call About a Metal Roof

Most of the metal work we quote starts with one of these.

Metal Roof Replacement on Worn-Out Shingle Roofs

The most common call. Shingles are curling, the gutters are full of grit, and the owner would rather not do this again in twenty years. A metal roof replacement takes the old roof off and puts on one built to go forty. Our page on new roof installs covers the shingle side if you want to compare.

Standing Seam on Steep Pitches and Dormers

Steep roofs, dormers and roof lines that change direction every few feet. That's where a standing seam roof earns its money, and where a rushed crew gets into trouble. Every cut piece and every bend of flashing has to meet the next one clean.

Metal Roof Repair for Loose Screws and Leaking Seams

Ribbed panels fasten through the face of the metal, and after enough summers those rubber washers dry out and let water by. Metal roof repair usually means tracking down where it's getting in and fixing it there, the same thinking we bring to leak repairs on shingle roofs.

Residential Metal Roofing for Flips and Rentals

A lot of our work is for folks who buy houses, fix them up, and sell or rent them out. Residential metal roofing costs more on day one, but on a rental you plan to hold for years, a roof you never get a call about is worth something.

Silver standing seam metal roof installed by White's Roofing Co in Bristol, TN

Three generations

Why a Family Metal Roofing Contractor Takes the Slow Way

You deal with the family, not a sales rep. Bobby and his son run the work, and Bobby's dad, 82 now, still drives out to look at jobs. A metal roofing contractor that has lived on word of mouth for five decades can't hide a crooked panel. Neighbors look up.

If ribbed panels will do the job for less, we'll say so. If the house is better off in shingles, you'll hear that too. Most of our metal goes on homes, but we also handle re-roofs and repairs on existing buildings through our commercial roofing work.

Metal roof installation on a white farmhouse in Bristol, TN

On the job

What to Expect While Your Metal Roof Goes On

Most of our house roofs take one to two days. Steep metal roofs with dormers and custom cuts can run four days or longer, and you'll know which kind you've got before we start.

Tear-off is loud, and cutting metal adds its own racket. Before we show up:

  • Move the car out of the driveway
  • Take pictures off the walls on the top floor
  • Keep pets inside and away from the work
  • Walk the finished roof with us before the crew pulls out

Want to see finished metal before you decide? Look through recent metal and shingle roofs from around the Tri-Cities.

Pricing

What Sets the Price of a Metal Roof in Bristol

We don't post prices online. Metal roofing costs more up front than shingles, and how much more depends on the house. A simple ranch in ribbed panels and a steep two-story in standing seam aren't the same conversation.

Every metal quote gets priced on the roof, not over the phone, and we'll walk you through each line. If a repair on the roof you have now makes more sense this year, we'll tell you that instead.

What changes a metal roof quote

  • Standing seam or ribbed panels
  • Roof size and pitch
  • Dormers, valleys and custom cuts
  • How many layers of old roofing come off
  • Whether the decking needs replacing

Service area

Metal Roofs Across the Tri-Cities and Southwest Virginia

Bristol is home base. We put metal on lake houses near South Holston, farmhouses out past Bluff City, and homes in Johnson City, Kingsport and Elizabethton. On the Virginia side we work Bristol, Meadowview and the small towns beyond them, and our roofing work in Abingdon shows how far up the road we go.

If you've been searching metal roofing near me or metal roofers near me from a town that isn't on this list, call anyway. Odds are we've driven your road.

  • Bristol TN
  • Johnson City TN
  • Kingsport TN
  • Elizabethton TN
  • Blountville TN
  • Bluff City TN
  • Piney Flats TN
  • Bristol VA
  • Abingdon VA

FAQ

Metal Roofing Questions We Hear in Bristol

Standing seam or ribbed metal: which is right for my Bristol house?

Standing seam hides its fasteners under raised seams, so there are no screws through the face of the roof to work loose over time. It costs more and looks cleaner. Ribbed panels screw down through the metal, cost less, and suit simpler roofs and tighter budgets. We'll lay out both against the actual shape of your roof.

How long will a metal roof hold up in Bristol weather?

Forty years or more when it goes on right. Hot summers, freeze and thaw, and wind across the ridges are hard on any roof, but metal handles all three better than shingles. The install matters as much as the panel, which is why we take our time on flashing and trim.

Is a metal roof loud when it rains?

Not the way most people picture it. Over solid decking and underlayment, rain on a house roof sounds a lot like rain on shingles. The loud tin roofs folks remember are usually barns and sheds with nothing under the metal but rafters.

Will snow slide off a metal roof?

Yes, and sometimes all at once. On a Bristol house with a door, steps or a walkway under the eaves, we talk about where that snow is going to land before the first panel goes on.

How do I get a metal roofing estimate in Bristol?

Call us at (423) 340-0649 or tap Get a Free Estimate on this page. We'll come out, get on the roof, measure it, and go over standing seam and ribbed options with you. The estimate is free.

Get a Metal Roof Estimate From a Bristol Family

Call White's Roofing Co for an honest look at your roof. (423) 340-0649